Friday 8 July 2022

5 Safety Tips While Using Any Crane

There are many misconceptions related to crane safety and operation. Being in a construction industry whether small, medium, or large, everybody must have an idea about the safety parameters. Well, many construction industries deny the parameter facts and thus are dragged towards hassle. What are these parameters, and how dangerous they can be if not followed according to the rule? Let’s read.

According to crane manufacturers in India, there are 5 most common mistakes any crane user can do.

Loading

You think that loading a crane extra will not create any difference, but this is the most dangerous rule you are about to break. The crane might support the overloading, but not for long. A few passes might go fine, but after trying overloading a couple of times, you can make the hoists week, and in the coming future, the chances of an accident increase.

Hoist Movement

The movement of the electric wire rope hoist should be straight up and straight down only. Does not matter how long the rope is, it should be used as it is meant to be. The ropes should move within its groove, if it leaves the groove, it may cause severe accidents.

Upper Limit Switch

It is designed to prevent collision. If you want to pull the load to an extra limit, till the upper limit switch, use the extra hook. Ask your service provider to attach an extra switch. The first switch is for safety, and not for the operations.

Breaks

Almost every crane has two breaks, one is used commonly, and the second is used when there is no electricity. However, in both cases, it is not safe to stand under the loaded crane and think that the breaks will hold the load. No matter how strong you think the break is, never stand under the loaded crane.

Reverse button

Gone are the days when people would use a reverse feather to control the velocity of the vehicle when it was traveling straight. These days, smooth start and stop buttons take care of that part. Now OSHA strictly says no to the reverse button.

No matter how long you have been using the crane, periodical checking of the crane is mandatory. Never ignore any of the points and make sure you use full safety.

Ambica Engineering:

Ambica Engineers is a leading crane manufacturer in India, they offer cranes used in loading and unloading heavy goods. 

No comments:

Post a Comment